Standard Features

The Pulsar 1212NT 2,000W Production Laser System continues to combine the latest developments in machine, CNC and laser resonator technologies. In contrast to the traditional “jack-of-all-trades” laser-cutting machine, the Pulsar 1212NT is a specialist in high production of short run sheet metal parts.

• Synchronized stainless steel rollers and a high speed capacitive head provide high throughput of scratch-free stainless and aluminum parts.
• Stealth clamps reduce dead zones and maximize material utilization.
• Full machine width work chute automatically unloads large parts and allows flexibility in the location of the lead-in/lead-out points. The machine configuration allows several parts to be unloaded simultaneously, increasing throughput.
• Amada’s patented DoubleCutTM stacked sheet cutting technique provides productivity gains of up to 80% over conventional single sheet processing.
• The high speed CNC incorporates a cutting data library and available network interface. The advanced, turbine driven, RF excited, fast axial flow CO2 laser automatically calibrates itself at power-up, ensuring parameter repeatability. 
• Requires less than half the floor space of previous generation Production Laser Systems, with the material moving in only one direction, the laser mounted on the frame and a pendant mount control system

  Technical Specifications
  MOTION PACKAGE

  Travel Method		X axis for work piece movement, Y axis for cutting head movement
  Control Method		X, Y & Z simultaneous 3 axis control and B axis
  Drive Motors		FANUC AC Servo (X, Y, Z, and B)
  Maximum Sheet Size		50.0" (Y) x 100.0" (X) with one repositioning cycle
  Maximum Axis Travel		50.0" (Y) x 50.0" (X) x 11.8" (Z) x 0.78” (B)
  Maximum Cutting Speed		787 IPM
  Maximum Table Speed		3,149 IPM. per axis (4,454 IPM. 45° vector)
  Maximum Speed Z-Axis		787 IPM
  Positioning Accuracy		±0.0004"/20"
  Repeatability		±0.0004"
  Maximum Material Weight		484 lbs. (4’ x 8’ x 3/8” or 4’ x 6’ x 1/2”)
  Number of Clamps		2 standard specification
  Work Chute		66” (Y) x 21” (X)
  Assist Gas		4 ports, part program selectable
  Machine Size		125.0” x 150.0” x 95.0”
  Machine Weight		12,232 lbs including laser resonator
  Electrical Requirements		208 VAC, 3 phase, 60 Hz., 10 KVA
  CNC CONTROLLER
  Model		AMNC-F
  Display		LCD Color Graphics Display
  Control Function		X, Y, Z-Axis Simultaneous and Focus Lens B-axis, and Laser Power control (CW, Gated Pulse, Pierce Routines etc.).
  Data Input Method		Manual (MDI), Edit, DNC, or 3 ½” PC compatible disk.
  Minimum Command Unit		0.0001” (X, Y, Z)
  Minimum Travel Unit		0.0001” (X, Y, Z)
  Standard Memory		1 mb
  Optional Memory		2 mb
  Hard Drive		10 gb
  Operating Modes		Automatic and Manual
  Display Modes		Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self Diagnostics
  Interlock Displays		Cooling Water Status, Gas Pressure Status, Vacuum Status, Turbo Blower Malfunction, Shutter Status, Beam Power, Resonator Discharge, Door Open, WACS.
  Electrical requirements		See Motion Package